Continuous galvanizing/galvalume line
For cold and hot strip galvanizing, the SDI plant is equipped with a continuous galvanizing line including a horizontal Drever furnace heated by a direct-fired and a radiant-tube zone.
The line is prepared for the later installation of an ultra-fast gas cooling section to allow for future production of high-strength steel. The scope of supply also includes a DUMA-BANDZINK air knife system that will homogeneously and precisely set the zinc layer thickness to ensure high surface quality. A change system with two zinc pots permits the strips to be coated with a conventional zinc layer or an aluminum-zinc alloy. For post-treatment, the line is equipped with a four-high skin-pass mill stand, a tension leveler and two horizontal shuttle-roll coaters, as well as with an oiling machine in the exit section. The galvanizing line is able to process strips with a thickness of up to 4.0 mm (0.16") and a width up to 1,930 mm (76") . Its annual capacity will be 500,000 tons (0.55 million short tons).
Main data
Strip width | 965 – 1,930 mm |
Strip thickness | 0.25 – 4 mm |
Entry speed | 274 m/min |
Process speed | 198 m/min |
Exit speed | 274 m/min |
Capacity | 475,400 t/year |