Measuring systems for bar, wire rod, and tubes with monitor control system
MEERgauge® laser system is available for bars, wire rod, and tubes and creates a true-shape cross-section from about 400 synchronous measuring points in a shared coordinate system. The results are then displayed with maximum precision. Unlike with conventional systems, the true shape of the contour can be represented precisely. With no moving or oscillating parts, the system requires almost no maintenance.
Benefits at a glance
- High measurement data density
- Short exposure time and absolute synchronization of the measuring probes
- Measuring equipment in the immediate vicinity of the roll stands
- Direct transfer of measured values to the mill stand control system (mill stand control)
- Compatible with 2-roll and 3-roll systems
- Time and cost benefits from direct production control
MEERgauge® for wire rod, bars, billet, sections, tubes
| Type | D50-4ES | D100-4ES | D150-4ES | D200-4ES | D300-4ES | D400-4ES | D600-4ES | |
| Typical products | Bars, wire rod, rebars | Bars, wire rod, rebars | Bars, pipes | Bars, pipes, sections | Bars, pipes, sections | Bars, pipes, sections | Bars, pipes, sections | |
Product range | 4,5 - 44 | 10 - 85 | 15 - 130 | 20 - 185 | 30 - 270 | 40 - 350 | 60-540 | |
| Number of sensors | 4 | 4 | 4 | 4 | 4 | 4 | 4 | |
| Accuracy down to +/- | 0,015 | 0,02 | 0,03 | 0,04 | 0,05 | 0,08 | 0,015 | |
| Measuring window size (mm) | ⌀ 50 | ⌀ 100 | ⌀150 | ⌀200 | ⌀300 | ⌀400, 400x200 | ⌀600, 600x350 |
Features of robust sensor technology
- Four or eight PxD sensor heads
- Up to four laser colors for synchronous acquisition
- Internal product database for tolerances and shrinkage factors
- Customized Level II interface
- High-speed output to surface defect detection (SurfTec)